 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| HPWG N500 HPWG N506 HPWG N501 HPWG N507 HPWG N502 HPWG N508 HPWG N503 HPWG N550 HPWG N504 HPWG N551 HPWG N505 HPWG N552 SnapLED High Mount Stop Light Array Technical Data DS29 Using Lumiled's patented solderless clinch technology and SnapLED emitters, this six LED linear assembly is an integrated LED stop lamp solution complete with control circuitry. Benefits * Cost effective LED Solution for HMSL Applications * Life of Vehicle Light Source * Standard Design for Multiple Vehicle Applications * Rugged and Compact In addition to three types of power connector, the HMSL product line offers vehicle designers a choice of three flux output levels for use on exterior mounts or for implementation behind the rear glass. Furthermore, SnapLED offers two radiation pattern options for use where greater luminous intensity is required. Where enhanced reliability is needed, high voltage protection circuitry is provided. SnapLED HMSL features a compact and rugged design and provides a cost effective source for vehicle high mount stop lamps. Features * Drive Circuitry and Connector Included * Choice of connector type * Light Source Sufficient for SAE/ECE/JIS HMSL Requirements SnapLED High Mount Stop Light Array (09/01/02) Document #: DS29 Selection Guide (all lamps are TS AlInGaP Red-Orange and voltage is 12.8 volts) Part Number HPWG-N500 HPWG-N501 HPWG-N502 HPWG-N503 HPWG-N504 HPWG-N505 HPWG-N506 HPWG-N507 HPWG-N508 HPWG-N550 HPWG-N551 HPWG-N552 Description HMSL with pin connector HMSL with pin connector HMSL with pin connector HMSL with varistor & hole connector HMSL with varistor & hole connector HMSL with varistor & hole connector HMSL with wire connector HMSL with wire connector HMSL with wire connector HMSL with narrow angle light beam HMSL with narrow angle light beam HMSL with narrow angle light beam Total flux V (lm)[1,2] Min. Max. 19.0 28.0 36.0 19.0 28.0 36.0 19.0 28.0 36.0 19.0 28.0 36.0 30.0 45.0 58.0 30.0 45.0 58.0 30.0 45.0 58.0 30.0 45.0 58.0 Power Input (W) Min. Max. 1.6 3.1 3.1 1.6 3.1 3.1 1.6 3.1 3.1 1.6 3.1 3.1 1.9 3.5 3.5 1.9 3.5 3.5 1.9 3.5 3.5 1.9 3.5 3.5 Notes: 1. Total integrated flux of the array at Vin = 12.8 V, Rth junction-ambient = 12.9C/W, which assumes that the array is attached to a thermally absorbing substrate. To determine junction temperature, multiply Rth by power consumption and add to ambient temperature. 2. V is the total usable flux measured after the lamp has stabilized Circuit Schematic SnapLED High Mount Stop Light Array Document #: DS29 (09/01/02) Outline Drawing Notes: 1. See HPWS-TH00 or HPWT-TH00 datasheet for emitter specifications. 2. Dimensions are in millimeters (inches). 3. Dimensions without tolerances are nominal. Side View SnapLED High Mount Stop Light Array (09/01/02) Document #: DS29 Absolute Maximum Ratings at TA = 25C Parameter [1] HPWG-N5xx Units V W V C C C C DC Input Operating Voltage 16 Power Dissipation 7.0 500 Reverse Voltage (IR = 200 A) Operating Temperature Range(12.8V-13.5V) [2] -40 to +85 Storage Temperature Range -55 to +100 LED Junction Temperature 125 High Temperature Chamber 125 (2 hrs.) Notes: 1. 16V operation is allowed at Tambient=25C only. 2. Temperature range for sustained operation based on Rth-junctionambient=12.9C/W. Optical and Electrical Characteristics Device type HPWG-N50x Operational Forward Voltage VF (Volts) Min. Max. 9 16 Color Dominant Wavelength d (nm) [1,2] Min. Max. 611 634 Notes: 1. The dominant wavelength is derived from the CIE Chromaticity Diagram and represents the perceived color of the device. 2. The dominant wavelength does not vary between emitters by more than 8nm within the same assembly. SnapLED High Mount Stop Light Array Document #: DS29 (09/01/02) Company Information Lumileds is a world class supplier of Light Emitting Diodes (LEDs) producing billions of LEDs annually. Lumileds is a fully integrated supplier, producing core LED material in all three base colors (Red, Green, Blue) and White. Lumileds has R&D development centers in San Jose, California and Best, The Netherlands. Production capabilities in San Jose, California and Malaysia. Lumileds is pioneering the high flux LED technology and bridging the gap between solid state LED technology and the lighting world. Lumileds is absolutely dedicated to bringing the best and brightest LED technology to enable new applications and markets in the Lighting world. Lumileds may make process or materials changes affecting the performance or other characteristics of our products. These products supplied after such changes will continue to meet published specifications, but may not be identical to products supplied as samples or under prior orders. LUMILEDS www.luxeon.com www.lumileds.com For technical assistance or the location of your nearest Lumileds sales office, call: Worldwide: +1 408-435-6044 US Toll free: 877-298-9455 Europe: +31 499 339 439 Fax: 408-435-6855 Email us at info@lumileds.com Lumileds Lighting, LLC 370 West Trimble Road San Jose, CA 95131 (c)2002 Lumileds Lighting. All rights reserved. Lumileds Lighting is a joint venture between Agilent Technologies and Philips Lighting. Luxeon is a trademark of Lumileds Lighting, LLC. Product specifications are subject to change without notice. SnapLED High Mount Stop Light Array Document #: DS29 (09/01/02) |
Price & Availability of DS29
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |